0 2 1 5mm thickness aluminum zinc alloy coated steel

0.14-1.5mm Thickness Aluminum-Zinc Coated Steel Coil for

Aluminum for gutters:0.027" or 0.032" for seamless gutters and any other thickness for custom gutters. Zinc:0.7 mm, 0.8mm and 1.5 mm. Alliance Steel offers a variety of cold rolled steel sheet and coil products and value-added services to meet customer needs. Alliance Steels cold rolled steel service capabilities include slitting, shearing

1. Metallic-Coated Products and Specifications

GalvInfo Center email:[email protected] Toll-free phone:1-888-880-8802 1 1. Metallic-Coated Products and Specifications GalvInfoNote 55% Aluminum-Zinc Alloy-Coated Steel Sheet 1.4 REV 1.2 DEC 2017 Introduction The most widely used metallic coating for the corrosion protection of steel is zinc 2. Coating Processes and Surface Treatments has a greater affinity for iron than zinc, so immediately (within 0.15 seconds)1 after the steel enters the coating bath, the stable intermetallic compound that forms is not a zinc-iron compound, but an aluminum-iron compound, i.e., Fe 2Al 5. This alloy layer (also known as a barrier or

55% ALUMINUM-ZINC ALLOY COATED STEEL Grade

** Maximum thickness suitable for organic coil coating is 0.0466 55% Aluminum-Zinc Alloy Coated Steel - hot-dip aluminum & zinc alloy coated structural steel (Mn) 1.35 Elongation in 2 inch, minimum % - 0-10 Sulfur (S) 0.04 Hardness, HRB - 84-99 See ASTM A 792 for more details Supply Condition Standard Optional 55% Aluminum-Zinc Alloy Coated Steel - Cascadia55% Aluminium-Zinc Alloy Coated Steels coating out-performs galvanized steel at a rate of 2 6 times. 55% Aluminium-Zinc Alloy Coated Steel is a favourite of architects due to its eye-catching aesthetics, long-lasting performance, design flexibility and

55% Aluminum-Zinc Alloy Coated Steel

55% Aluminum-Zinc Alloy Coated Steel 55% aluminum-zinc alloy coated steel is cold-rolled carbon steel with a continuous hot dip process metallic coating composed of:55% aluminum, 43.4% zinc, and 1.6% silicon. The alloy coating is applied to both sides of the steel sheet. Aluminium-zinc alloy coated steel sheet in coilDescription. Zinc-aluminum alloy galvanized steel is steel sheets in coil coated with 2 layers of alloy (55% aluminum, 43.5% zinc, 1.5% Silic), using continuous hot-dip technology through NOF furnace temperature to control mechanical properties which are suitable for different applications.

Aluminum Zinc Coated Steel Sheet in Coil AZ70

Hot Dipped Aluminum Zinc Alloy Coated Steel Sheet in Coil AZ70 0.35 mm cheap price. Size Product Code:79BR11TH6B203 / Total Coated Thickness (TCT):0.2 mm / Alu-zinc Coating:AZ70 (70 grams per square meter of sheet, total both sides) / Yield Strength:G550 BSI-STEEL :"Quality is our Policy" - The ONLY Single Skin Panel Offering. Single skin Roof and wall Panels manufactured by BSI-STEEL are rolled formed from either 0.5 mm (Nominal) thick AluZinc coated steel (AluZinc is an Aluminum / Zin alloy) confirm to ASTM A 792 M Grade 345 classes having a minimum yield strength of 34.5 KN / CR 2 with Zinc / Aluminum coating confirming to AZ 150 (or optional) The coating is achieved by hot deep

Coated Al Aluminum Thickness Tolerance

Buy Al-Zinc Coated Steel Coil For Construction Roof Price. Product Structure of Al-Zinc coated steel coil. Description of Aluminum Zinc Rolled Coil The detailed information for the Al-Zinc coated steel coil is as following and it is mainly using for roofing producing, making ceiling grid and all kinds of roll forming structure. 0.20mm to 1.20mm 914mm, 1000mm, 1200mm, 1219mm and 1250mm, or slit Galvalume Steel, Zinc Aluminium alloy coated Steel It is available in Base Metal Thickness (BMT) ranging between 0.30mm to 1.30mm and coil widths of 900 to 1250 mm. It is offered with yield strength of minimum 300 MPa to minimum 550 MPa depending on the application. ZINCALUME ® steel is a zinc/aluminium alloy coated steel with a distinctive clear resin surface finish, made by Tata

Galvalume Steel, Zinc Aluminium alloy coated Steel

It is available in Base Metal Thickness (BMT) ranging between 0.30mm to 1.30mm and coil widths of 900 to 1250 mm. It is offered with yield strength of minimum 300 MPa to minimum 550 MPa depending on the application. ZINCALUME ® steel is a zinc/aluminium alloy coated steel with a distinctive clear resin surface finish, made by Tata Home - GalvalumeBIEC International Inc. is the worldwide licensor of the technology and know-how associated with 55% Aluminum-Zinc alloy coated sheet steel (better known as GALVALUME). A measure of the success of this program is the fact that virtually all of the major steel companies worldwide have become licensees of

Import Data and Price of zinc coated steel under HS Code

prime quality prepainted aluminum zinc alloy coated steel sheet in coils size:0.80mm(bmt)x912mmxc 2,518,671:55:nov 18 2016:72107000:prime quality prepainted aluminum zinc alloy coated steel sheet in coils size:0.80mm(bmt)x912mmxc:south korea:thar dry port icd/ahmedabad:kgs: aluminium zinc alloy coated steel sheet -2 Introduction Coating Weight [Mass] Measurement Systemsexample, a G90 coating contributes about 1.6 mils (0.0016 inches, or about 42 microns) to the total thickness of the coated sheet. For a coating equally applied to both sides of the sheet, this means there is about 0.0008 inches (21 microns) of zinc on each surface. To accurately determine the thickness of the coating, the coated

Jiang Lin Steel Corporation

Product name:Alloy Steel GI strip coils Alloy:Boron 0.0008% min Application:Pipe / Purling Hs code:7226.99.00 Thickness:0.6mm-2.5mm Zinc coating:30g-270g Payment terms:LC 90days acceptable AZ30 Aluzinc Raw Material of pre painted steel coil for general building panels Magnesium Aluminum Zinc Alloy Coated Sheet Price It is available in a very wide range of steel grades:steels for cold forming and deep drawing applications, structural steels and High Strength Low Alloy steels. Standard:1 ASTM A1046/A1046M. 2 EN 10346. 3 Company standard. Specification:1 Thickness 0.27mm-2.0mm. 2 Width 1000mm-1250mm . 3 Surface:

Magnesium Aluminum Zinc Alloy Coated Sheet Price

It is available in a very wide range of steel grades:steels for cold forming and deep drawing applications, structural steels and High Strength Low Alloy steels. Standard:1 ASTM A1046/A1046M. 2 EN 10346. 3 Company standard. Specification:1 Thickness 0.27mm-2.0mm. 2 Width 1000mm-1250mm . 3 Surface: STANDING SEAM SHEET METAL ROOF PANELS 07 41 13 Rib Height:2 inches (50.8 mm) Material:Aluminum-zinc alloy-coated steel sheet, ASTM A 792, Class AZ50 coating designation, Grade 50, structural quality, 0.028 inch (0.71 mm) or 0.034 inch (0.86 mm) nominal thickness Minimum Roof Slope Capability:1/2:12 Sealant:Factory-applied side lap sealant Side Lap:Mechanically seamed

Sheet Steel Facts - Ideal Roofing

AZ180 180 0.050 (1) The coating thickness allowance for Galvanneal or wiped coat is normally disregarded. Table 3:CSSBI Standards for Base Steel Minimum Thickness PRODUCT Base Steel Minimum Thickness(1) (mm) Base Steel Nominal Thickness (mm) Steel roof deck 0.71 0.76 Composite steel floor deck, structural only 0.71(2) 0.76(2) Sheet Steel Facts - Ideal RoofingAZ180 180 0.050 (1) The coating thickness allowance for Galvanneal or wiped coat is normally disregarded. Table 3:CSSBI Standards for Base Steel Minimum Thickness PRODUCT Base Steel Minimum Thickness(1) (mm) Base Steel Nominal Thickness (mm) Steel roof deck 0.71 0.76 Composite steel floor deck, structural only 0.71(2) 0.76(2)

Standard Specication for ZincCoated (Galvanized)

Iron and Steel Articles with Zinc or Zinc-Alloy Coatings A700 Practices for Packaging, Marking, and Loading Meth-ods for Steel Products for Shipment Wire Diameter, mm Class 1 Coating, g/m2 0.20 to under 0.25 20 0.25 to under 0.40 25 0.40 to under 0.50 30 0.50 to under 0.60 35 0.60 to under 0.80 40 0.80 to under 1.10 45 Standard Specification for Steel Sheet, 55 % Aluminum-Zinc 2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.. ASTM Standards. A90/A90M Test Method for Weight [Mass] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings. A568/A568M Specification for Steel, Sheet, Carbon, Structural, and High-Strength, Low-Alloy, Hot-Rolled

Standard Specification for Zinc-5 % Aluminum (Hot-Dip

1.1 This specification covers the requirements for zinc-5 % aluminum coated, by the hot-dip process on iron and steel products. The coating may also contain small amounts of elements other than zinc and aluminum that are intended to improve processing and the characteristics of the coated product. Steel Dynamics, Inc. - Galvalume® Steel SheetRust-preventative oil, chromate passivation, RoHS-compliant trivalent chrome passivation, or a clear acrylic coating Material Specifications ASTM A 792 hot-dipped 55% aluminum-zinc alloy-coated carbon-steel sheet in commercial, forming, and structural-steel grades

Technical Bulletin Construction - U.S. Steel

difficult as the coating thickness increases. Coating weight and thickness conversions for galvanized and galvannealed coatings (from ASTM A 653):1.0 oz/ft2 = 1.7 mils coating = 305.15 g/m2 1.0 mil = 0.59 oz/ft2 1.0 m = 7.14 g/m2 (Valid for zinc coatings only - not for GALVALUME ) The material in this paper is intended Technical Bulletin Construction - U.S. Steeldifficult as the coating thickness increases. Coating weight and thickness conversions for galvanized and galvannealed coatings (from ASTM A 653):1.0 oz/ft2 = 1.7 mils coating = 305.15 g/m2 1.0 mil = 0.59 oz/ft2 1.0 m = 7.14 g/m2 (Valid for zinc coatings only - not for GALVALUME ) The material in this paper is intended

Thickness 0.9mm And Width 914mm High Reflective

Thickness 0.9mm and width 914mm high reflective aluminium zinc sheet alloy coil. Product details . Hot-dip aluminium-zinc coated steel coil is produced by cold rolls in different specifications with Al-zn coating on the surface , to prevent the steel surface from corrosion ,and to lengthen service time.The surface has high decoratively bright gray color and regular spangle. U008en Coated Steel Sheets - Nippon SteelHot-dip zinc-aluminum-magnesium-silicon alloy coated steel sheet and strip ALSHEETTM Hot-dip aluminum-coated steel sheet and strip (0.2%) Base metal Zn 20g/m. 2 (2.8µm) Base metal Zn-Ni alloy 20g/m. 2 (2.8µm) Base metal Electrolytic zinc-nickel alloy-coated steel sheet and strip Zn-Sn-Ni alloy coated steel sheet and strip

ZAM® - Zinc, aluminum and magnesium alloy coated steel

WHEELING-NIPPON STEEL is proud to announce our newest product, ZAM ® - branded the "Corrosion protection of the 21 st Century". ZAM ® is a remarkably superior corrosion-resistant hot-dip Zinc-Aluminum-Magnesium alloy coated steel sheet product. WHEELING-NIPPON STEEL is the first company in the Americas to produce such a product. ZAM® - Zinc, aluminum and magnesium alloy coated steelWHEELING-NIPPON STEEL is proud to announce our newest product, ZAM ® - branded the "Corrosion protection of the 21 st Century". ZAM ® is a remarkably superior corrosion-resistant hot-dip Zinc-Aluminum-Magnesium alloy coated steel sheet product. WHEELING-NIPPON STEEL is the first company in the Americas to produce such a product.

Zinc Alloys - an overview ScienceDirect Topics

Concave radii greater than 0.5 mm. No draft angle required. Maximum extrusion ratios:40:1 for aluminum alloys, 5:1 for carbon steel. Section thickness should be greater than 1.5 per cent of the maximum dimension. Maximum diameter = Ø250 mm. Minimum section = 1 mm for aluminum and magnesium alloys; 3 mm for steel. Zinc Coating - an overview ScienceDirect TopicsFigure 2.Five-year corrosion tests on early zincaluminum alloys; effect of aluminum content on corrosion performance of aluminumzinc alloy coatings after exposure in various atmospheres:1 mm=25.4 µm, 1 ft=approx. 0.035 m

Zinc Coatings American Galvanizers Association

To obtain the amount of zinc per unit area of surface, the weight given must be divided in two, assuming equal distribution on both sides. For example, an ASTM A653 Class G90 sheet contains 0.90 oz/ft 2 of zinc or about 0.45 oz/ft 2 per side. Economic Considerations. Initial cost will always be considered when specifying steel corrosion protection. ALUMINUM-ZINC ALLOY-COATED STEEL SHEETJul 01, 2020 · Hoa Sen Aluminum-zinc alloy-coated steel sheet is produced on the modern NOF technology line and meets the requirements of ASTM A792/A792M (USA), AS 1397 (Australia), JIS G 3321 (Japan), MS 1196 (Malaysia) and EN 10346 (Europe) standards. The surface of the product is bright and beautiful with silver color, outstanding corrosion resistance, effective heat resistance,